Cut-Off Wheel, Type 1 Wheel/Disc, 10 in Dia, 0.1 in Thick, 5/8 in Arbor, 25, 30 Grit

LENOX® METALMAX™ Cut-Off Wheel, Type 1, 10 in Diameter, 0.1 in Thickness, 5/8 in Arbor, 25, 30 Grit, Diamond Abrasive, 5900 rpm Maximum Speed, Applicable Materials: Aluminum, Cast Iron, Non-Ferrous Metal, Rebar, Sheet Metal, Stainless Steel, Steel

• METALMAX™ delivers 1000 or more cuts with no need for wheel changes, that is 30 times longer life than thin bonded cut-off wheels
• Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime and a lower cost per cut compared to thin bonded cut-off wheels
• Because LENOX® METALMAX™ is made with diamonds, it doesn't get smaller, the cutting depth stays the same throughout its life, meaning better control, reach and precision
• With LENOX® METALMAX™ there is less odor and dust residue as the wheel does not wear down like bonded abrasives, sparks originate only from the material being cut
• LENOX® METALMAX™ is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals
• LENOX® METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces, no changes in operating settings are required, use LENOX® METALMAX™ as you would a bonded abrasive wheel
• Average performance for 4-1/2 in wheel in 1 in carbon steel square tube vs thin bonded abrasive cut-off wheels
• When cutting aluminum, it is recommended to apply cutting wax or other type of saw lubricant to avoid chip welding

• SDS https://assets.unilogcorp.com/267/ITEM/DOC/LENOX_1972917_SDS.pdf